We are able to offer a no-obligation audit of your site. Electric vehicle charger installations for residential and commercial applications are subject to site inspection fee of $135 including GST. This fee will be deducted from your final installation if you proceed. Chargemaster will design the most cost-effective charging solution from supply to installation. With 24/7 electric coverage nationwide repair services are available at any time. If you have a problem with your charging station, we will service you needs in an adequate time frame. Our partners come with a dependable guarantee which ensures a high quality of workmanship throughout New Zealand.
Our electricians follow EV installation guidelines, ensuring absolute compliance is guaranteed. With every charging station sold, we supply the installer with a copy of the SDoc (Supplier Declaration of Conformity). The document is assurance that the EVSE (Electric Vehicle Service Equipment) is suitable for electrical usage within New Zealand.
*All of our products are subject to different supplier warranties, contact us to find out more.
If you are considering installing an electric vehicle charger within your home, you need to be aware of your existing electrical usage, connection capacity and future charging needs.
If you are considering installing EV chargers at your business, commercial premises or apartment complex; Chargemaster is able to provide specialised EV charging stations.
As the uptake of EV's continues to rise, public charging stations are in high demand. However, there are factors that need to be considered when assessing potential charging station sites.
We recommended that all of our products are subject to annual inspection. The durability and integrity of our products will ensure they need minimal maintenance.
EV Charging Modes:
The international standard for electric vehicle conductive charging system (EN 61851-1) has defined modes of EV charging. Below you will find all of the relevant modes, when considering your charging needs.
|Mode 1: Domestic socket and extension cord (230V)||
|Mode 2: Domestic socket and cable with protection device (230V)||
|Mode 3: Specific socket on a dedicated circuit||
|Mode 4: Direct current (DC) connection for fast recharging||
Installing a charging station
When you consider installing a private or public charging station there are a few – existing electricity usage, electricity connection capacity and future EV charging needs. An audit of your home or business will provide you with this information.
It is important to understand your future EV charging needs. You will need to consider the following:
- How many chargers are you wanting to install?
- How many EVs will be charging at your premises at any given time?
- What type and size of the chargers are you wanting to install?
After having an audit performed, you may find there is sufficient existing capacity. In some cases, our offerings involve upgrading the existing connection capacity, or encompassing the use of Smart Chargers.
Anyone installing EV charging stations should comply with the New Zealand WorkSafe’s guidelines.
- Under no circumstance may an individual install a charging station unless they are licensed and competent to do so.
- Depending on the existing infrastructure, the installation may also require electrical works by a certified electrician or electrical engineer. A competent electrician or electrical engineer will be able to advise you on what is required.
- EVSE products are required by law to comply with New Zealand’s Electrical Safety Regulations and Standards (IEC 61851-1 for AC and DC + IEC 61851-23 for DC).